MAKING STRUCTURE MORE LIGHTER
Studs
| Particulars | Description |
|---|---|
| TYPE of Material for Framing | Cold form Alum zinc steel with 150GSM (55% Al and 45% Zn) Or cold form galvanized steel with 180GSM |
| Web & Flange of the Stud | 89mm & 41mm |
| Thickness | 0.75 mm to 1.2 mm (depending upon the requirement) |
| Density of Light Gauge Steel Framing | 7850 kg/m3 |
| Yield Strength | 350Mpa - 550Mpa |
| Designed Section | C shape & U shape |
| Accessibility | Pre-punched service holes, dimples, cuts for serviceability |
| Design Criteria | As per international standards of AISI (American Iron and Steel Institute) |
Sheathing Material
| Particulars | Description |
|---|---|
| Sheeting Material | Paustic Board (magnesium) |
| Thickness of Paustic Board | 8mm/9mm/10mm |
| Density | 1000 - 1200 kg/m3 |
| Dimensional Stability in mm (length, width, thickness) |
±2mm, ±2mm, 0.4mm |
| Moisture Content | 4% -9% |
| Screw Withdrawal Force | ≥ 70N/mm |
| Screw Holding Capacity | ≥ 20kg/ screw |
| Bending Strength | ≥ 8Mpa |
| Environment | No radiation, no asbestos and formaldehyde free |
| Water Permeability | No moisture or water |
| Colour | Slate grey and/or chalk white |
| Surface | Smooth (one sided) |
Insulation
| Particulars | Description |
|---|---|
| Insulating material | Rockwool |
| Density of insulting material | 48 kg/m3 |
| Thickness of Insulation | 50mm/90 mm |
Screws and Anchor Fasteners
| Particulars | Description |
|---|---|
| Screws for studs | Self-drilling Stainless-steel screws |
| Screws for sheeting | Self-drilling screws |
| Anchor Fasteners | Stainless-steel |
Jointing and Finishing Compound
| Particulars | Description |
|---|---|
| Joint filler | Ready to use EJC |
| Binding tape | Self-adhesive glass-fibre tape |
| Paintable | Yes |